5L Vacuum Planetary Mixer for Battery Slurry Mixing

Section

Description

1-1 Product Name and Model

A. Planetary Mixer;

B. Specification/Model: TMAX-QG -5L

1-2 Basic Structure

A. Motorized pot body lifting type;

B. Single direct temperature measurement mode;

C. Dual stirring shafts

1-3 Barrel (Mixing Barrel)

A. Design volume: 10L; Effective volume: 5L;

B. Material: Inner liner and outer layer are SUS304;

C. Inner liner mirror polished for good roundness;

D. Matching flange on top of mixing barrel with upper barrel flange; E. Pure jacket direct cooling/heating with G1/2" inlet/outlet; jacket suitable for cold/hot water (oil)

1-4 Upper Barrel Body (Kettle Lid)

A. Material: SUS304;

B. One powder/liquid hopper that can be quickly opened/closed; with spotlight, two small windows for viewing and light, reserved vacuum pressure gauge port, among other necessary ports

1-5 Mixing Principle

Dual stirring paddles with low clearance design prevent dead angles and ensure thorough mixing with kneading interference and circular motions

1-6-1 Revolving/Stirring Motor and Inverter, Reducer

A. One unit;

B. Motor power: 1.5Kw/4P;

C. Inverter for variable speed control;

D. Reducer with ratio I=40.26, service factor fa=1.55

1-6-2a Planetary Revolving Speed

0~48rpm, adjustable

1-6-2b Wall Scraper (Optional)

One set;

Scraper material: SUS304 and Teflon; matches planetary revolving speed

1-6-3 Clearance Reference Values (Non-mandatory)

A. Stirring paddle and blade: 10±2.5 mm;

B. Paddle and bottom: 2～6 mm;

C. Paddle and barrel wall: 5±1.5 mm

1-7-1 Mixing Shaft/Paddle Speed

Speed: 0~86rpm, adjustable

1-7-2 Mixing Paddles

A. Material: SUS304; B. Quantity: Two (sets)

1-7-3 Mixing Paddle Type Option

A. Optional: Twisted blade

1-8-1 Dispersion Motor

1.5KW

1-8-2 Dispersion Speed (Revolution)

High-speed dispersion, (dispersion speed is 3000rpm)

1-8-3 Dispersion Shaft and Disk

Diameter: 60mm

1-9 Lifting (Pot Body)

A. Electric lifting with linear guide rails, positioning device; safe and reliable positioning;

B. Lifting motor power: 0.18KW

1-10 Vacuum System

A. Mixing and dispersion can be carried out under vacuum; Vacuum degree: ≤-0.95Mpa;

B. Vacuum pump selected based on actual working conditions;

C. Dynamic sealing: Mechanical seal; D-2 Static sealing: O-ring seal;

D. Sealing material: Dynamic sealing in PTFE and fluoro rubber combination; static sealing in fluoro rubber;

E. Can maintain pressure for 12 hours without oil leaks into the barrel during mixing or pressurized state

1-11 Positioning System

A. Equipped with positioning adjustment and locking devices, precisely locates the mixing barrel and the upper barrel, preventing rotation;

B. Precise fit between the lower flange of the upper barrel and the positioning lug of the stirring barrel ensures reasonable position and accurate positioning

1-12 Distribution Cabinet

Functions such as vacuum device operations, variable frequency speed control, temperature display (control), lighting, lifting, emergency stop, etc., are displayed and operated on the distribution cabinet; Note: Dispersion has a timing function (optional, recommended for the user, not included in the regular design)

1-13 Safe Operation

A. Relying on the inverter and limit switches, the upper barrel automatically stops when it reaches the set position through a specially designed control route;

B. The mixing and dispersion cannot start while the upper barrel is raising, and similarly, the upper barrel cannot lift while mixing materials and cannot open the mixing barrel;

C. The circuit design including proximity switches ensures that the planetary components cannot lift under vacuum;

D. Special vacuum buffer tank design prevents backflow of vacuum pump oil into the mixing barrel

1-14 Temperature Measurement

0-300℃, the temperature probe is located on the barrel wall near the bottom, in direct contact with the material

1-15 Main Engine Total Power

4.2KW;

Working voltage/frequency: 380V/50Hz/3Phase;

Control voltage: 220V

1-16 Overall Dimensions

Length × Width × Height: Refer to drawings;

Weight: Approximately 400KG