Manual CIP Press Machine With 30mm ID Vessel

Pressure Vessel Size

·         30mm Dia. x 110mm Height (pressing die cavity)

·         Max sample height: 60mm

·         Hydraulic oil volume (with sample loaded): 40mm distance to the top edge.

·         Made of high strength alloy with stainless steel protective jacket

·         Spare CIP die is available at extra cost for existing customer

   Max. Hydraulic Pressure in
Chamber

·         278 Mpa ( 43500 PSI)

Gauge Pressure Value to Force Conversion

o    The actual force applied on the Vessel Cylinder (Ton) equal to the force applied to your working piece

o    For calculating the actual pressure (Mpa) applied on your working piece, please follow the equations in below:

          P = T/πr^2 x g x 10

·         P: Pressure (Mpa) applied on your working piece

·         T: Force (metric ton) Applied on the Pressure Vessel Cylinder

·         g: Standard gravity. g ≈ 9.8 m/s2

·         π: ~3.14

·         r: Radius (cm) of the Pressure Vessel ( 1.5 cm)

·         *1000 Kg = 1 Metric Tone; 1 Mpa = 10 Kg/cm2

Hydraulic Machine

·          24T Max.

·          Pump is separated from cylinder for safe operation

Operation Temperature

10 - 40°C

Bottom Cylinder Traveling Distance

20 mm maximum. The bottom cylinder (piston) is shown in the illustration in dimension section.

Dimension of Working Space

D1: 100mm
D2: 100mm
D3: 140mm
H1: 370mm
H2: 340mm

Overall Dimension  (including 20T Presser)

 470 L x 330W x 700H, mm

Net Weight

110 kg

Shipping Weight & Dimension

270 lbs; 50"x40"x40"

Compliance

CE Certified

Warranty

·         Two years limited warranty with lifetime support

·         Seal O-ring is consumable, not covered by warranty

Accessories in Standard package

Spare O-ring  and accessories are included

Warning

·         Never let the press holding the target pressure for more than 8 minutes,

·         Pressure must be completely released first, then make sure the hand wheel and the pressure release valve has been tightened before pressing

·         Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (20mm)

Name

Qty

1

Main machine (20T hydraulic pressing machine)

1 unit

2

CIP pressing die

1 set

3

Seal kit

1 set

4

Black Rubber Rings O.D (30mm)

5 pcs

5

Pressing oil

1 bottle

6

Hex-socket wrench (for top pressing die and degassing)

1 pc