Battery Tab Shaping Pressing Cutting Machine For Prismatic Cell Assemble

1. 1  Function: this is  special  design  for cut  and  shaping press  of stacking  cell  after tab welded.

1.2  After placing the tab weld cell in place, step on the foot switch, the cylinder drives the upper pressure block and the knife to move downwards to cut off the excess stacking material and tabs, and then move the station to press the remaining tabs to flatten.

Technical parameter

Compressed air		0.5-0.8 MPa
Cutting pressure		≤1000Kgf
Cutting strock		15mm
Cutter length		200mm
Press pressure		≤1000Kgf
Working speed		300-500 times/hour, accoridng to real process parameter
Equipment weight		About 140kg
Appearance Colour		According to customer requirement, customer provide colour plate
Voltage		Single-phase: 220V/60Hz
Power	100W
Suitable battery width	<225mm( this is standard machine, will custom accoridng to customer’s real battery dimention)
Process performance	1. Manual feeding and unloading; 2. Manual conversion between cutting and flattening; 3. Manual or foot control action; 4. With automatic counting function; 5. There are safety protection door panels around.