Small Heat Vacuum Secondary Sealer Sealing Machine After Electrolyte Filling For Pouch Cell Research

Small Heat Vacuum Secondary Sealing Machine After Electrolyte Filling For Pouch Cell Research

 

TMAX-FS200 is mainly used for pouch cell vacuuming and second sealing after electrolyte filling.

Main feature

1.Head made of copper material, heat transfer effect is good to save power consumption, improve efficiency, energy saving than similar products.

2.The upper and lower head pressure can be adjusted through the regulator to achieve different process parameters.

3.Upper and lower head with cylinder driven by two linear guide sleeve guide, up and down flexible, accurate guidance to ensure product parallelism after sealing requirements

4.With automatic puncturing function, waste recovery unit.

5.Cover cavity driven by the cylinder, guided by a linear guide sleeve, up and down flexible, accurate guide to ensure product sealing requirements

6.Can be applied to different specifications of the product battery, and the adjustment is simple and convenient.

7.Easy to operate, beautiful appearance, small size, light weight.

Specification

Chamber	It is made of aluminum alloy,corrosion resistant and firm in structure
Vacuum degree	96kpa(vacuum pump provided by the buyer)
Heating temperature	RT~250℃;
Temp accuracy	±1.5℃
Heat sealing pressure	0~7kg/cm2 adjustable
Heat sealing time	Adjustable from 0 to 99 seconds
Sealing width	5±0.4mm(according to customer requirements)
Maximum sealing length	200mm
Sealing thickness range	60~300um
Air consumption	About 0.2L compressed gas/once per seal.
Working speed of air compressor	≥180 times/h
Power	Using 300W heating tube,the power consumption of heating is about 0.6kw.
Power Supply	220V/50Hz;
Compressed air source	0.5～0.7Mpa;
Dimensions	L500mm*W350mm*H600mm;